1/32 – 1/2″ Jacobs Chuck with JT6 Taper
$7.25 – $65.00
1/32 – 1/2″ Jacobs Chuck* with JT6 Taper
Great for boring holes in peppermill bodies using Forstner and Brad Point bits. Comes with a Jacobs key to change bits easily, or get several Jacobs chucks and chuck a different bit in each for production drilling and rarely change bits again. Accepts bit shanks up to 1/2″
For mounting onto your lather you must choose either:
- #2 Morse Taper Adapter with JT6 Taper
- #3 Morse Taper Adapter with JT6 Taper
Tap the JT6 taper into the Jacobs Chuck with a wood mallet for a slip free fit.
*You need to purchase either of the accompanying Morse Taper adapters to fit your lathe’s headstock or tailstock.
Description
1/32 – 1/2″ Jacobs Chuck* with JT6 Taper
Great for boring holes in peppermill bodies using Forstner and Brad Point bits. Comes with a Jacobs key to change bits easily, or get several Jacobs chucks and chuck a different bit in each for production drilling and rarely change bits again. Accepts bit shanks up to 1/2″
For mounting onto your lathe you must choose the appropriate drill chuck arbor:
- #2 Morse Taper Adapter with JT6 Taper
- #3 Morse Taper Adapter with JT6 Taper
Tap the JT6 taper into the Jacobs Chuck with a wood mallet for a slip free fit.
*You need to purchase either of the accompanying drill chuck arbors to fit your lathe’s headstock or tailstock.
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Attribute | Jacobs Chuck with Key, #2 Morse Taper, #3 Morse Taper, 3 Chuck Set |
You must be logged in to post a review.
You may also like…
-
- Sale! Add to cart
-
- Out of StockRead more
- Finishing Supplies, Kits, Tools
Beall Buffing Kit
- $119.00
-
Reviews
There are no reviews yet.