1/32 – 1/2″ Jacobs Chuck with JT6 Taper

$7.25$65.00

1/32 – 1/2″ Jacobs Chuck* with JT6 Taper

Great for boring holes in peppermill bodies using Forstner and Brad Point bits. Comes with a Jacobs key to change bits easily, or get several Jacobs chucks and chuck a different bit in each for production drilling and rarely change bits again. Accepts bit shanks up to 1/2″

For mounting onto your lather you must choose either:

  • #2 Morse Taper Adapter with JT6 Taper
  • #3 Morse Taper Adapter with JT6 Taper

Tap the JT6 taper into the Jacobs Chuck with a wood mallet for a slip free fit.

*You need to purchase either of the accompanying Morse Taper adapters to fit your lathe’s headstock or tailstock.

Clear
Add to Wishlist
Add to Wishlist

Description

1/32 – 1/2″ Jacobs Chuck* with JT6 Taper

Great for boring holes in peppermill bodies using Forstner and Brad Point bits. Comes with a Jacobs key to change bits easily, or get several Jacobs chucks and chuck a different bit in each for production drilling and rarely change bits again. Accepts bit shanks up to 1/2″

For mounting onto your lathe you must choose the appropriate drill chuck arbor:

  • #2 Morse Taper Adapter with JT6 Taper
  • #3 Morse Taper Adapter with JT6 Taper

Tap the JT6 taper into the Jacobs Chuck with a wood mallet for a slip free fit.

*You need to purchase either of the accompanying drill chuck arbors to fit your lathe’s headstock or tailstock.

Additional information

Weight N/A
Dimensions N/A
Attribute

Jacobs Chuck with Key, #2 Morse Taper, #3 Morse Taper, 3 Chuck Set

Reviews

There are no reviews yet.

Be the first to review “1/32 – 1/2″ Jacobs Chuck with JT6 Taper”

Your email address will not be published. Required fields are marked *

You may also like…