Tools

    • Ted’s Signature Grind Finesse Scrapers
      Select options This product has multiple variants. The options may be chosen on the product page
      • , ,

      • Ted’s Signature Grind Finesse Scrapers

      • Price range: $63.00 through $294.00
      • These scrapers are designed primarily for use on spindle-oriented work but can also be used on bowls. They are for finessing the final form after cutting the initial shape with a gouge. Many beautiful woods with character are difficult to cut with standard chisels like crotch wood, curly maple, or spalted wood. The final finessing cut is almost impossible to…
    • Klingspor Shop Rolls 2 x 25 Yds.
      Select options This product has multiple variants. The options may be chosen on the product page
      • ,

      • Klingspor Shop Rolls 2 x 25 Yds.

      • Price range: $43.00 through $256.50
      • Klingspor Shop Rolls are professional-grade sandpaper manufactured in Poland. 25 yds too much? Purchase 10-yard shop rolls instead. Aluminum Oxide Cloth-Backed sandpaper Tears Easily to size Consistent Grit 2" x 25 Yds
    • Out of Stock
      Combination Tool
      Read more
      • ,

      • Combination Tool

      • $180.00
      • Metal Spinning Combination Tool Used for spinning and burnishing pewter, aluminum, or any non-ferrous metal - 18" -  unhandled. Features two spinning tools in one. The flat or broad-shaped side of the combination tool is used for burnishing the freshly spun metal to smooth out the ripples left behind by the "bullet" or conical-shaped side of the tool which forms…
    • Out of Stock
      Carbide Forstner Bit Sets
      Select options This product has multiple variants. The options may be chosen on the product page
      • , ,

      • Carbide Forstner Bit Sets

      • Price range: $175.95 through $179.95
      • Carbide Forstner Bit Sets with hex Shanks Since the discontinuation of the Forstner bits I used on my Making a Peppermill DVD, I have been looking for a carbide Forstner set as a replacement. This set cuts exceptionally well in hard timbers like Cocobolo, Tamboti, Lignum Vitae, and Ebony, as well as Ash, Oak, and Maple. They are quick and…
    • Out of Stock
      Beall Buffing Kit
      Read more
      • , ,

      • Beall Buffing Kit

      • $119.00
      • Buffing wheels produce a beautiful lustrous finish on well prepared pieces that embody a sense of suppleness unmatched by other polishing methods. And they're fast! Follow the procedures in Brilliant Finishes for Woodturners and buff your pieces to a highly reflective surface to not only reveal the beauty of the wood underneath the finish but to create a soft, smooth…
    • Klingspor Shop Rolls 2 x 10 Yds.
      Select options This product has multiple variants. The options may be chosen on the product page
      • ,

      • Klingspor Shop Rolls 2 x 10 Yds.

      • Price range: $19.99 through $118.50
      • Klingspor Shop Rolls are professional grade sandpaper manufactured in Poland. Aluminum Oxide Cloth-Backed sandpaper Tears Easily to size Consistent Grit 2" x 10 yds. Save $1.44 when you buy the shop roll kit Save more when you buy the 25 yard rolls!
    • Trim Tool – Metal Spinning
      Select options This product has multiple variants. The options may be chosen on the product page
      • ,

      • Trim Tool – Metal Spinning

      • Price range: $45.00 through $110.00
      • Metal Spinning Trim Tool Metal spinning trim tool is 18" - unhandled. Used for trimming pewter, aluminum, copper or any non-ferrous metal during metal spinning operations on the lathe. Pre-ground trim tool cutter bit and holder can be purchased separately. Features: Trim Cutter Bit: 2 1/2" x 1/4" x 1/4" high speed steel w/ 10% cobalt Cutter sports three cutting…
    • Carbide Forstner Bit Peppermill Bit Kit
      Select options This product has multiple variants. The options may be chosen on the product page
      • ,

      • Carbide Forstner Bit Peppermill Bit Kit

      • Price range: $2.50 through $80.00
      • Traditional Peppermill Bit Kit - Save $6.25 when buying the set This 6 piece-set will efficiently drill out hundreds of 4" to 8" traditional peppermill blanks, as illustrated on the Making a Peppermill DVD. You can download the Shop Notes PDF file for steps in the drilling sequences for making the traditional 8" Peppermill or Saltmill. These bits are ideal…
    • 1/32 – 1/2″ Jacobs Chuck with JT6 Taper
      Select options This product has multiple variants. The options may be chosen on the product page
      • ,

      • 1/32 – 1/2″ Jacobs Chuck with JT6 Taper

      • Price range: $7.25 through $65.00
      • 1/32 - 1/2" Jacobs Chuck* with JT6 Taper Great for boring holes in peppermill bodies using Forstner and Brad Point bits. Comes with a Jacobs key to change bits easily, or get several Jacobs chucks and chuck a different bit in each for production drilling and rarely change bits again. Accepts bit shanks up to 1/2" For mounting onto your…
    • Combination Adapter for Buffing Wheels
      Add to cart
      • ,

      • Combination Adapter for Buffing Wheels

      • $27.95
      • The combination adapter for 1/2" or 5/8" shaft motors. Mount this adapter on a 1/2 HP motor or greater (1725 RPM is recommended). Then screw in the Beall buffing wheel into this adapter and buff. Changing from one buffing wheel compound to the next is as simple as unscrewing the buff from the combination adapter and screwing the next buff…
    • Brilliant Finish Sandpaper Sampler Pack
      Select options This product has multiple variants. The options may be chosen on the product page
      • , ,

      • Brilliant Finish Sandpaper Sampler Pack

      • Price range: $23.00 through $26.50
      • A great way to try out Klingspor's J-weight aluminum oxide paper and the silicon carbide wet dry papers in 9 x 11-inch sheets. Grits 120 through 600 are aluminum oxide cloth-backed sandpaper. Sheets can be torn into 2" strips just like the shop rolls. Perfect for sanding at the lathe. This is the same quality sandpaper as the shop rolls…
    • 8 Inch Wax Buffing Wheel
      Add to cart
      • ,

      • 8 Inch Wax Buffing Wheel

      • $23.50
      • 8 Inch Beall Wax Buffing Wheel Soft and multi-layered wheel perfect for removing residual wax streaks and producing a high buffed shine. Mount on Combination adapter below on motor with a 5/8" or 1/2" shaft or mount onto a morse taper adapter for your lathe. 3/8" x 16 tpi screw is mounted in center of wheel with 1" of exposed…
    • #2 Morse Taper Lathe Adapter
      Add to cart
      • ,

      • #2 Morse Taper Lathe Adapter

      • $21.95
      • #2 MT lathe adapter. Use with the Combination Adapter  and buff right on your lathe. Opposite end of adapter is tapped for a 1/4" x 20 threaded rod to secure to your lathe with a washer and wingnut. Threaded rods can be purchased at your local hardware store and custom cut to your lathes' headstock spindle length.
    • Kutzall Rotary Burr 1/4″ Sphere-1/8″ Shank
      Add to cart
      • , ,

      • Kutzall Rotary Burr 1/4″ Sphere-1/8″ Shank

      • $16.95
      • High performance tungsten-carbide coated shaping tool (1/4" sphere, 1/8" shank). excellent for carving and cutting away bark inclusions, and cleaning soft areas (like in spalted maple) to prepare for inlay. For smooth easy to control removal on wood. Features: Original Coarse 1/8" shank Composition: tungsten-carbide coated 1/4" Diameter sphere cutter Rapid material removal Smooth continuous shaping Provides ease of control…
    • Sale!
      Palette Knives (Set of 5)
      Add to cart
      • ,

      • Palette Knives (Set of 5)

      • Original price was: $22.50.Current price is: $16.50.
      • Palette Knives Set of 5 Palette knives perfect for controlling the amount of metal powder added to voids, cracks, and crevices during the inlay process. Perfect for inlaying metal powder Conserves the metal powder Apply metal  directly to the carved pattern Smooths and tamps to a slightly proud surface Clean up glue squeeze-out Apply wood fillers Spread glue or thicker…
    • Steel Diamond-Shape Cutter
      Add to cart
      • , ,

      • Steel Diamond-Shape Cutter

      • $14.99
      • Steel Diamond Shape Cutter, 1/8" Shank, as used on "The Metal Inlay Techniques DVD" for carving lines both straight and curved into wood for metal inlaying. Use with a rotary cutter like a Foredom power tool or a Dremel tool with a 1/8" collet. Features: 1/8" shank Composition: Steel Diamond shaped cutter Cutting edge around the large diameter.
    • Diamond File Set
      Add to cart
      • , ,

      • Diamond File Set

      • $14.50
      • Keep them sharp with this Diamond File Set Great for sharpening carbide Forstner bits or carbide router bits. I use these on my Forstner bits after drilling 150 or so peppermills. If your bits are smoking, drilling larger holes than the bit size or drilling with the tail stock seems harder, you need to sharpen. You'll experience less stress on…
    • Flexi-Pads
      Select options This product has multiple variants. The options may be chosen on the product page
      • , ,

      • Flexi-Pads

      • Price range: $11.25 through $13.25
      • 1 " Flexi-Pads are great for quick removal of leftover nubs on the base of hollow forms or spindles, or for removing excess metal inlay from your inlaid joints, crevices and voids when mounted in your rotary tool like the Dremel or Foredom.  2" Flexi Pad is great for sanding bowls on the lathe when mounted in a  power drill.…
    • Sale!
      Diamond Dresser with Handle
      Add to cart

      • Diamond Dresser with Handle

      • Original price was: $8.95.Current price is: $7.95.
      • Diamond Dresser Makes grinding wheel dressing easy. This 0.25 carat Diamond Dresser makes truing abrasive grinding wheels fast and easy while exposing a fresh surface for efficient grinding operations. Keep your turning tools sharp. By truing your grinding wheels, you'll make all your sharpening chores easier. Simply guide the Diamond Dresser against the grinder's tool rest to restore the wheel…
    • Klingspor 5 Pack Silicon Carbide Sandpaper
      Select options This product has multiple variants. The options may be chosen on the product page
      • , , ,

      • Klingspor 5 Pack Silicon Carbide Sandpaper

      • $7.80
      • Klingspor 5 Pack Silicon Carbide Sandpaper (Single Grit) WET/DRY 9" X 11" SHEETS POLISHING GRITS in 800, 1000, 1200, 1500 or 2000 For the ultimate in brilliance when polishing a sprayed-on finish like urethane. More information can be found on the Brilliant Finishes DVD where I demonstrate how to restore the brilliance of a wet sanded piece in chapter 3…
    • Sale!
      Dental Picks – Set of 4
      Add to cart
      • ,

      • Dental Picks – Set of 4

      • Original price was: $6.75.Current price is: $5.75.
      • Set of 4 Dental Picks This stainless steel Pick Set is perfect for a variety of uses around the shop. These picks have a lot of back-bone and are great for removing bark inclusions from burls or expanding cracks and crevices in wood to prepare the gap for metal inlay. Each pick features two different pick styles, a knurled non-slip grip…