Skip to content
-
-
Add to cart
- Metal Inlay, Tools
-
$22.50
- Set of 5 Palette knives perfect for controlling the amount of metal powder added to voids, cracks, and crevices during the inlay process. On Sale - Now through the end of November! Perfect for inlaying metal powder Conserves the metal powder Apply metal directly to the carved pattern Smooths and tamps to a slightly proud surface Clean up glue squeeze-out…
-
-
Add to cart
- Finishing Supplies, Tools
-
$21.95
- #2 MT lathe adapter. Use with the Combination Adapter and buff right on your lathe. Opposite end of adapter is tapped for a 1/4" x 20 threaded rod to secure to your lathe with a washer and wingnut. Threaded rods can be purchased at your local hardware store and custom cut to your lathes' headstock spindle length.
-
-
Add to cart
- Metal Inlay, Parts & Supplies, Tools
-
$16.95
- High performance tungsten-carbide coated shaping tool (1/4" sphere, 1/8" shank). excellent for carving and cutting away bark inclusions, and cleaning soft areas (like in spalted maple) to prepare for inlay. For smooth easy to control removal on wood. Features: Original Coarse 1/8" shank Composition: tungsten-carbide coated 1/4" Diameter sphere cutter Rapid material removal Smooth continuous shaping Provides ease of control…
-
-
Add to cart
- Metal Inlay, Parts & Supplies, Tools
-
$14.99
- Steel Diamond Shape Cutter, 1/8" Shank, as used on "The Metal Inlay Techniques DVD" for carving lines both straight and curved into wood for metal inlaying. Use with a rotary cutter like a Foredom power tool or a Dremel tool with a 1/8" collet. Features: 1/8" shank Composition: Steel Diamond shaped cutter Cutting edge around the large diameter.
-
-
Add to cart
- Kits, Peppermill Parts & Supplies, Tools
-
$14.50
- Keep them sharp with this Diamond File Set Great for sharpening carbide Forstner bits or carbide router bits. I use these on my Forstner bits after drilling 150 or so peppermills. If your bits are smoking, drilling larger holes than the bit size or drilling with the tail stock seems harder, you need to sharpen. You'll experience less stress on…
-
-
Select options
- Finishing Supplies, Metal Inlay, Tools
-
$11.25 – $13.25
- 1 " Flexi-Pads are great for quick removal of leftover nubs on the base of hollow forms or spindles, or for removing excess metal inlay from your inlaid joints, crevices and voids when mounted in your rotary tool like the Dremel or Foredom. 2" Flexi Pad is great for sanding bowls on the lathe when mounted in a power drill.…
-
-
Sale!
Add to cart
- Tools
-
$8.95 $7.95
- Diamond Dresser Makes grinding wheel dressing easy. This 0.25 carat Diamond Dresser makes truing abrasive grinding wheels fast and easy while exposing a fresh surface for efficient grinding operations. Keep your turning tools sharp. By truing your grinding wheels, you'll make all your sharpening chores easier. Simply guide the Diamond Dresser against the grinder's tool rest to restore the wheel…
-
-
Select options
- Finishing Supplies, Kits, Parts & Supplies, Tools
-
$7.80
- Klingspor 5 Pack Silicon Carbide Sandpaper (Single Grit) WET/DRY 9" X 11" SHEETS POLISHING GRITS in 800, 1000, 1200, 1500 or 2000 For the ultimate in brilliance when polishing a sprayed-on finish like urethane. More information can be found on the Brilliant Finishes DVD where I demonstrate how to restore the brilliance of a wet sanded piece in chapter 3…
-
-
Sale!
Add to cart
- Metal Inlay, Tools
-
$6.75 $5.75
- Set of 4 Dental Picks This stainless steel Pick Set is perfect for a variety of uses around the shop. These picks have a lot of back-bone and are great for removing bark inclusions from burls or expanding cracks and crevices in wood to prepare the gap for metal inlay. Each pick features two different pick styles, a knurled non-slip grip…